Anapoima Environmental Engineering Job Listings

Indeed

Food Engineer

Food Engineer – School Feeding Program (SFP) **Salary:** To be agreed upon Job Description **Position Description:** A **Food Engineer** is required to support the implementation of the School Feeding Program (SFP) in the municipality of **Fusagasugá**, through monitoring, control, and verification of **food quality and safety processes**, ensuring compliance with sanitary regulations and the program’s technical guidelines. Requirements **Academic Qualifications:** * Professional degree in **Food Engineering**. * Valid **professional license card**. **Experience:** * Minimum three (3) years of experience in activities related to: * Food quality * Food safety * Good Manufacturing Practices (GMP) * Areas related to quality management in food service operations **Competencies:** * Knowledge of sanitary regulations and SFP guidelines. * Ability to monitor, control, and prepare reports. * Attention to detail and adherence to procedures. * Teamwork and assertive communication. Required Documents Applicants must submit the following complete documentation to the email address **trtempleo@gmail.com**: * Updated resume. * Employment certifications verifying experience (properly signed, indicating the employer’s name, position held, contract purpose, and start and end dates). * Copy of diploma and graduation certificate. * Copy of the **valid professional license card and COPNIA**. * Copy of national ID card. Position Conditions * **Work location:** Municipality of **Fusagasugá – Cundinamarca**. * **Position type:** Full-time. * **Work modality:** On-site. * **Contract type:** To be determined. Application **Submission email:** trtempleo@gmail.com **Contact WhatsApp:** 319 671 7163 Position type: Full-time

Cra. 36 #11A-39, Bogotá, Colombia

Negotiable Salary

Indeed

Farm Operator

Pig farm operators are required. Collaborators are needed for the lactation and fattening areas of a technified farm, implementing welfare and sustainability practices. Position Type: Full-time

Cra. 36 #11A-39, Bogotá, Colombia

Negotiable Salary

Indeed

Welding Assistant

Welding assistant with basic knowledge required to manufacture parts according to blueprint specifications or instructions given by the plant supervisor. Perform welding and assembly tasks under the direct supervision of a Senior or Master Welder or supervisor, following simple technical drawings and specifications. Assist Senior or Master Welders in various tasks, learning welding and assembly techniques and processes along the way. Handle welding and assembly equipment and tools, always complying with safety measures and good practices. Perform preparation tasks for pieces to be welded and assembled, such as cutting, polishing, drilling, among others. Participate in inspection and conduct basic tests to ensure the quality of welds and assemblies. Ensure proper use of protective gear and safety equipment at all times during job performance, both in the plant and at client facilities. Schedule: Monday to Friday from 7:00 am to 3:30 pm, Saturdays from 7:00 am to 11:00 am Salary: 1,900,000 + transportation allowance + statutory benefits Position type: Full-time Application question(s): * Age

Cl. 9ª #16-37, Funza, Cundinamarca, Colombia

COP 1,900,000/year

Electromechanical Technician64549937354370123

Indeed

Electromechanical Technician

**Company Description:** The company was founded in April 1968. It began manufacturing metal parts for agricultural use. In the 1980s, it introduced to the market the first plastic sprayer. Today, 50 years later, PROGEN S.A. is internationally recognized for its leading products in the sprayer market. The traditional RoyalCondor has become the first plastic sprayer in the Colombian market. Aware of the growth in the agricultural market, technological and industrial advancement, and globalization, RoyalCondor MOTORIZED was launched—a line offering a wide range of products and serving as a direct representative of well-known international brands such as Kawasaki. As a complement to our agricultural line, PROGEN S.A. offers a portfolio of specialized NOZZLES and ACCESSORIES for application. **Job Mission:** Perform maintenance on injection and blow molding machines, and generally those related to plastic manufacturing. **Job Responsibilities:** Carry out maintenance on injection and blow molding machines; specific knowledge in electricity and industrial electronics, electropneumatics, electrohydraulics, PLC handling and programming, automation, and industrial mechanics is essential. **Requirements:** 5 years of experience as an electromechanical technician in plastic manufacturing companies Electromechanical technician or technologist, industrial electricity, industrial maintenance Valid Conte card **Offer Conditions:**

Cl. 12 # 13-51, Soacha, Cundinamarca, Colombia

Negotiable Salary

Agricultural Engineer – MIPE Manager (IRFE)64520999148930124

Indeed

Agricultural Engineer – MIPE Manager (IRFE)

**Position: Agricultural Engineer – MIPE Manager (IRFE)** **Location:** Sabana de Bogotá **Contract type:** Indefinite term / Full-time **Job Description:** An important company in the floriculture sector is seeking an **Agricultural Engineer** to serve as **MIPE Manager (IRFE)**. The candidate will be responsible for leading the implementation, monitoring, and control of integrated pest and disease management programs in **carnation** crops, ensuring compliance with phytosanitary and sustainability standards. **Main Responsibilities:** * Lead integrated pest and disease management strategies in crops. * Supervise the execution of biological, cultural, and chemical controls according to IRFE protocols. * Conduct periodic monitoring, diagnostics, and technical reporting. * Train operational staff in safe and efficient handling practices of phytosanitary products. * Ensure compliance with environmental, safety, and quality regulations. * Coordinate with production and post-harvest departments to ensure crop health. **Requirements:** * **Education:** Agricultural Engineering degree. * **Experience:** Minimum **3 years in carnation crop management** within floriculture companies. * **Specific Knowledge:** * Integrated Pest and Disease Management (MIPE / IRFE). * Plant physiology and nutrition in carnations. * Good Agricultural Practices (GAP) and environmental regulations. * **Skills:** Leadership, planning, results orientation, and teamwork. **We Offer:** * Job stability and development opportunities. * Competitive salary based on experience. Position type: Full-time

Cra. 1c Sur #18b-75, Facatativá, Cundinamarca, Colombia

Negotiable Salary

Indeed

Machinist

The Machinist is responsible for operating, adjusting, and maintaining machine tools such as lathes and milling machines, conventional and/or CNC, for the manufacturing, repair, and modification of metal parts according to drawings, technical specifications, and quality standards. This role requires high precision, blueprint reading, dimensional control, and compliance with industrial safety regulations. Academic Background * Technician or Technologist in Industrial Mechanics, Machining, Industrial Production, or related fields. * Additional courses in machining, metrology, blueprint interpretation, and industrial safety. Experience * Minimum 2 to 3 years in machining, turning, and milling within the metal-mechanical industry. * Proficiency with measuring tools (calipers, micrometers, dial indicators). * Experience in interpreting blueprints and geometric tolerances. Technical Skills * Operation of conventional lathes and milling machines (and CNC if applicable). * Reading and interpreting mechanical blueprints. * Knowledge in selecting cutting tools, speeds, and feeds. * Use of measurement instruments and quality control procedures. * Setup, assembly, and centering of workpieces. * Basic grinding (optional depending on company). * Good manufacturing practices and industrial safety. Job type: Full-time

Dg. 16 #97-37, Bogotá, Colombia

Negotiable Salary

MAINTENANCE TECHNICIAN MACHINERY64303565580034126

Indeed

MAINTENANCE TECHNICIAN MACHINERY

**We are hiring! Machinery Maintenance Technician** Are you a proactive person, do you enjoy fieldwork, and do you have experience in industrial machinery maintenance? This opportunity is for you! **Workplace:** CELTA Business Park – Funza, Cundinamarca **Salary:** Negotiable (based on experience) INDEFINITE CONTRACT **Social benefits and all legally required perks** **Requirements:** * Experience in preventive and corrective maintenance of industrial machinery (minimum 1 year). * Knowledge in diagnosing mechanical, electrical, or hydraulic failures (preferably with experience in multiple areas). * Availability to work in Funza. * Desired: Own means of transportation. **Main responsibilities:** * Perform preventive and corrective maintenance on machinery. * Ensure proper operation of equipment. * Compliance with industrial safety procedures. Job type: Full-time

Cl. 9ª #16-37, Funza, Cundinamarca, Colombia

Negotiable Salary

Construction Resident Engineer64300979238659127

Indeed

Construction Resident Engineer

We are seeking a **Civil Engineering professional** with **a minimum of three (3\) years of certified experience** in construction, preferably in **infrastructure or service station projects**. **Requirements and technical competencies:** * Proven experience in **site operation management, personnel supervision, and contractor oversight**. * **Valid certification in safe work at heights.** * Knowledge and application of **civil technical standards**, **construction standards**, and **on-site quality protocols**. * Ability to **interpret civil drawings**, **technical specifications and standards**, as well as **conduct and verify concrete and granular material tests**. * Proficiency in technological tools: **Microsoft Project, AutoCAD, and Office suite** * **Technical English proficiency** for interpreting construction documentation. **Personal competencies:** * Planning and organization. * Achievement orientation and goal accomplishment. * Assertive communication and teamwork. * Leadership and results-driven mindset. **Working conditions:** * **Schedule:** Monday to Friday from 7:00 a.m. to 4:00 p.m., and Saturdays from 7:00 a.m. to 11:00 a.m. * **Salary:** Between **$2\.800\.000 and $3\.100\.000**, depending on the candidate's experience and competencies * **Work location:** Municipality of **Madrid (Cundinamarca)** or nearby areas (residence in the area is essential). Position type: Full-time

Cl. 6 # 12-22, La Pincha, Madrid, Cundinamarca, Colombia

COP 2,800,000/year

Indeed

Transportation Analyst

Logistics Analyst required with 1 year of experience in: 1\. Acquisition and placement of vehicles nationwide ensuring company profitability, carrying out the entire process of third-party onboarding. 2\. HIGH SCHOOL DIPLOMA AND/OR TECHNICIAN AND/OR TECHNOLOGIST AND/OR LOGISTICS OPERATIONS COURSES. EXPERIENCE OF MORE THAN 12 MONTHS IN THE POSITION WILL BE VALIDATED. Must have 1 year of experience and knowledge in the following functions: IMPORTANT: Experience in acquiring carry-type, turbo, and standard vehicles. DRIVER DATABASE with vehicle typologies. Experience in nationwide distribution and last-mile operations, must reside in Funza, Siberia, or Calle 80, preferably with personal transportation. Assign just-in-time fleet required each day for each client. **Ensure operational profitability of the company in vehicle assignment.** Create cargo manifests. **Request corresponding orders for each shipment.** Request appropriate advances. **Register 100% of vehicles in operation.** Conduct documentary follow-up of positioned vehicles. **Support reconciliation and billing for positioned vehicles.** And other duties assigned by the immediate supervisor. Send resume to email: psicologiamf15@gmail.com or WhatsApp 3244151828 Job type: Full-time

Cl. 9ª #16-37, Funza, Cundinamarca, Colombia

Negotiable Salary

Senior Product Testing Technician64292698050433129

Indeed

Senior Product Testing Technician

Total Number of Openings 1 Chevron accepts applications for the Laboratory Technician position until 11/14/2025 at 11:59 PM (GMT \- 5\). The Laboratory Technician position supports the Lubricants and Fuels operation. This position requires availability to work rotating shifts from Monday to Saturday. Responsibilities for this position include: Product Formulation* Support in the development of formulations and analysis of raw materials for formulation changes. * Maintain and update manufacturing formulations in SAP according to the Lubricants Technology Area. * Optimize formulations based on obtained results or raw material quality. Product Quality and Assurance* Responsible for quality control routine, conducting physicochemical analyses for all finished products and raw materials, releasing or rejecting them. * Perform adjustments or corrections to mixtures when necessary. * Enter mixture formulations into SAP R/3\. * Create and issue quality certificates for Finished Products. * Implement changes in existing test methods and train other Laboratory Technicians. * Commission new laboratory equipment and train staff accordingly. * Troubleshoot equipment issues. * Develop and implement initiatives for improved laboratory practices to enhance the laboratory, productivity, and staff competence. * Coordinate non-routine laboratory activities such as product stability tests, etc. * Safeguard and track raw material shelf life in accordance with corporate requirements. * Collaborate on changes related to product introduction, including label, bottle, cardboard boxes, additives, and base oils. Quality Control Processes* Monitor and ensure reliability of the quality control process through calibration of instruments, chemicals, and equipment. * Perform control sample checks for statistical analysis. * Capture / record results and execute quality-related steps in SAP\-FIORI. * Record and report release times for batch/in-process samples and other required laboratory activities such as calibrations, control sample checks, standardizations, sample testing, etc. * Monitor and ensure Quality Control activities by analyzing statistical data from process sample controls and take necessary corrective actions as required. * Generate weekly reports on batches within specifications, support analysis and management of non-conformances, mixture adjustments, and products for disposal. * Generate reports on corrective actions taken regarding identified non-conformances. * Monitor and ensure batch release times to guarantee maximum laboratory productivity. Laboratory Testing Compliance / Quality System Maintenance / Fuel Regulation Analysis* Coordinate compliance of laboratory testing with external requirements such as ASTM and standardization programs. * Monitor and ensure compliance with prescribed testing procedures. * Purchase laboratory chemicals and supplies according to prescribed procedures. * Monitor and support compliance with ISO 9000 certification. * Support analysis of government fuel regulation initiatives with potential impact on operations; (represent Chevron as a Subject Matter Expert on technical laboratory committees), and provide technical support to the fuel terminal. Adherence to HES Policies and ISO Procedures* Ensure compliance with the Company's HES principles regarding safe work practices and disposal of hazardous chemical waste. Responsible for collaborating with the HAZCOM program. * Maintain the Laboratory Safety and Health Program. * Actively participate in and conduct Safeguard Learnings (SLT), Job Safety Analysis (JSA), Near Losses and Losses (NLI / LI) investigations. * Maintain and coordinate best practices and a continuous improvement culture in the laboratory. Mandatory Requirements:* Chemist with Professional Card verifiable by the Colombian Professional Council of Chemistry. * One year of experience in quality control in industry or the oil industry. * Experience and proficiency with computers and Office tools, Excel, Word, PowerPoint, others. * Leadership skills when working in a group. * Ability and willingness to lead and be led when working in a team. * Excellent communication skills. * Ability to work under pressure. * Ability to work with minimal supervision. * Analytical ability. Desirable Requirements:* Work experience in the Oil or Lubricants industry. * Intermediate\-Advanced English. * Knowledge of SAP modules (QM, Master Data, FIORI). Special Considerations:* Requires availability to work rotating shifts from Monday to Saturday. Relocation Options: Relocation is not offered for this position. International Considerations: Expatriate assignments will not be considered. Chevron regrets that it cannot sponsor employment visas nor consider individuals with temporary visa status for this position. Chevron participates in E\-Verify in certain locations as required by law.

Cl. 12 #65-11, Bogotá, Colombia

Negotiable Salary

CNC Technician and/or Technologist642170109195531210

Indeed

CNC Technician and/or Technologist

**Company Description:** The company was founded in April 1968. It began manufacturing metal parts for agricultural use. In the 1980s, it introduced to the market the first plastic sprayer. Today, 50 years later, PROGEN S.A. is internationally recognized for its leading products in the sprayer market. The traditional RoyalCondor has become established in the Colombian market as the first plastic sprayer in Colombia. Aware of the growth in the agricultural market, technological and industrial advancement, and globalization, RoyalCondor MOTORIZED was launched—a line offering a wide range of products and serving as a direct representative of well-known international brands such as Kawasaki. As a complement to our agricultural line, PROGEN S.A. offers a portfolio of specialized NOZZLES and ACCESSORIES for application. **Job Mission:** To machine and fabricate parts according to drawings for mold and die maintenance. **Job Responsibilities:** Machine and fabricate parts according to drawings for mold and die maintenance. Monitor test execution to confirm that the product meets the standards required by the company regarding performed maintenance. Properly register report codes and service orders. Fabricate parts using lathe and milling machines. Cut materials. Perform preliminary roughing for the fabrication of precision parts. **Requirements:** 3 years of experience as a CNC technician Technical or Technologist degree **Offer Conditions:

Cl. 12 # 13-51, Soacha, Cundinamarca, Colombia

Negotiable Salary

ELECTRICIAN or ELECTROMECHANIC641825783493131211

Indeed

ELECTRICIAN or ELECTROMECHANIC

Professional Electrician Technician, Electronics, Mechanical, or Mechatronics Engineering background, to support the company's maintenance department by performing preventive, corrective maintenance, and installations. Performs rotating shifts, requires teamwork skills. Demonstrable experience in industrial maintenance is essential. Job type: Full-time

Cl. 9ª #16-37, Funza, Cundinamarca, Colombia

Negotiable Salary

welder / sheet metal worker / assembler641500635165451212

Indeed

welder / sheet metal worker / assembler

An important company in the industrial-mechanical sector is looking for welders with knowledge in assembling structures and blueprint interpretation. Must be a technician, technologist, or certified by competencies; dynamic person with skills to work in a team and carry out welding tasks using different techniques and processes such as shielded metal arc welding and MIG, meeting required specifications; ability to interpret blueprints, knowledge of tools and equipment according to the job activity. Minimum one year of experience in the position Workplace: Bogota Salary negotiable Job type: Full-time

Cl. 12 # 13-51, Soacha, Cundinamarca, Colombia

Negotiable Salary

CNC Technician or Technologist641461987367701213

Indeed

CNC Technician or Technologist

**Company Description:** The company was founded in April 1968. It began manufacturing metal parts for agricultural use. In the 1980s, it introduced to the market the first plastic sprayer. Today, 50 years later, PROGEN S.A. is internationally recognized for its leading products in the sprayer market. The traditional RoyalCondor has become established in the Colombian market as the first plastic sprayer in Colombia. Aware of the growth in the agricultural market, technological and industrial advancements, and globalization, RoyalCondor MOTORIZED was launched—a line offering a wide range of products and serving as a direct representative of well-known international brands such as Kawasaki. As a complement to our agricultural line, PROGEN S.A. offers a portfolio of specialized NOZZLES and ACCESSORIES for application. **Job Mission:** Perform machining and fabrication of parts according to blueprints for mold and die maintenance. **Job Responsibilities:** Perform machining and fabrication of parts according to blueprints for mold and die maintenance. Monitor the testing process to confirm that the product meets the standards required by the company regarding the maintenance performed. Properly record report codes and service orders. Fabricate parts using lathe and milling machines. Cut materials. Perform preliminary roughing operations for the fabrication of precision parts. **Requirements:** 3 years of experience as a CNC technician. Technical or Technological degree. **Offer Conditions:**

Cl. 12 # 13-51, Soacha, Cundinamarca, Colombia

Negotiable Salary

Indeed

Quality Inspector

**Company Description:** The company was founded in April 1968. It began manufacturing metal parts for agricultural use. In the 1980s, it introduced to the market the first plastic sprayer. Today, 50 years later, PROGEN S.A. is internationally recognized for its leading products in the sprayer market. The traditional RoyalCondor has become established in the Colombian market as the first plastic sprayer in Colombia. Aware of the growth in the agricultural market, technological and industrial advancement, and globalization, RoyalCondor MOTORIZED was launched—a line offering a wide range of products and serving as a direct representative of well-known international brands such as Kawasaki. As a complement to our agricultural line, PROGEN S.A. offers a portfolio of specialized NOZZLES and ACCESSORIES for application. **Job Mission:** Knowledge of the ISO 9000, ISO 9001 Quality Management System **Job Responsibilities:** An important manufacturing company responsible for producing metal parts for agricultural use is seeking a Production Technician or technologist, production control, industrial engineering, chemical engineering, or environmental engineering professional for the position of Quality Inspector with a minimum of 1 year or 2 years of experience providing support and managing quality functions in the metalworking or plastics sector. Knowledge Knowledge of the ISO 9000, ISO 9001 Quality Management System, proficiency in statistical and control tools Knowledge in metrology Contractual Conditions **Working Hours:** Monday to Saturday, rotating shifts (6:00 AM–2:00 PM / 2:00 PM–10:00 PM and 10:00 PM–6:00 AM) **Salary:** $1'632.061 + 30% Quarterly Bonus Biweekly payments Daily meal allowance benefit Parking **Requirements:** Knowledge of the ISO 9000, ISO 9001 Quality Management System Proficiency in statistical and control tools Knowledge in metrology **Offer Conditions:**

Cl. 12 # 13-51, Soacha, Cundinamarca, Colombia

COP 1,632,061/year

Indeed

Production Worker

We want you to become part of the Nutripharma family; if your experience matches the position, do not hesitate to apply! We are looking for staff from: Cota, Funza, Mosquera, Bogotá, Suba, Villas de Granada, Ciudadela Colsubsidio, and Tenjo. **PROFILE:** Experience in food and/or dietary supplement production areas. Knowledge in raw material dispensing. Preferably with knowledge in operating production equipment. **REQUIREMENTS:** Education: High School Graduate. Experience: 1 year in similar positions. Skills: Measurement units, attention to detail, teamwork, good spelling. Good Manufacturing and Documentation Practices (GMP) (GDP). **RESPONSIBILITIES:** Carry out operations at the production and packaging plant to meet the production schedule, operation of equipment such as mixers, tablet presses, blister machines, sachet machines, encapsulators, filling machines, labelers, coders; clear knowledge of GMP and GDP; packaging processes such as labeling, boxing, and sealing finished product boxes. CENTRO EMPRESARIAL PORTOS SABANA 80 - COTA CONTRACT DIRECTLY WITH THE COMPANY SALARY $1,520,000 SCHEDULE: MONDAY TO SATURDAY, ROTATING SHIFT Email: vacantes@alimentosnutripharma.com Position type: Full-time

Cl. 9ª #16-37, Funza, Cundinamarca, Colombia

COP 1,520,000/year

LEAD ELECTROSTATIC PAINTING641447766067211216

Indeed

LEAD ELECTROSTATIC PAINTING

INGEMETAL WF SAS, a company in the metal-mechanical industry, requires for its work team a LEAD PAINTER with at least 2 years of experience in this or similar positions. Job-related responsibilities: Supervise all activities in the electrostatic painting area, ensuring compliance with established quality, safety, and efficiency standards. Perform electrostatic painting applications on various parts according to the work order specifications. Verify that painted parts meet the required technical and aesthetic criteria, identifying and correcting process deviations. Provide continuous training to operators on painting techniques, equipment usage, and best practices, promoting continuous process improvement. Working hours: Monday from 7:00 am to 5:15 pm, and Tuesday through Friday from 7:00 am to 5:00 pm. It is important to reside in areas such as Facatativá, Madrid, Bojacá, or nearby locations. Salary negotiable. Position type: Full-time

Cra. 1c Sur #18b-75, Facatativá, Cundinamarca, Colombia

Negotiable Salary

Technical Supervisor and Consultant – Design of Intelligent Containers for Mushroom Cultivation638396493460491217

Indeed

Technical Supervisor and Consultant – Design of Intelligent Containers for Mushroom Cultivation

We are seeking a highly qualified professional to take on the role of **Technical Supervisor and Consultant**, responsible for the **planning, design, improvement, and technical supervision** of intelligent containers and incubators applied to fungal cultivation. This person will lead the conceptualization and technical evolution of solutions, ensuring efficiency, scalability, and sustainability. **Responsibilities:** **1\. Planning and Design of New Solutions:** * Design functional and scalable architectures for intelligent containers intended for controlled cultivation. * Propose structural and technological improvements for future versions (v2, v3…) based on lessons learned, data analysis, and operational feedback. **2\. Preparation of Technical Drawings:** * Generate detailed electrical, electronic, and mechanical drawings defining the container's internal architecture. * Coordinate with the technical team for accurate implementation of drawings and field adjustments. **3\. Design Optimization and Evolution:** * Evaluate and redesign current systems to optimize energy consumption, automation, maintainability, and costs. * Document continuous improvement processes and design change management. **4\. Analysis of Critical Variables:** * Calculate and interpret physical, chemical, and environmental variables that could impact the container's internal environment (temperature, humidity, airflow, thermal insulation, etc.). * Advise on appropriate sensors, environmental control methodologies, and risk mitigation systems. **Required Profile:** * Degree in Electronic Engineering, Mechatronics, Electromechanical Engineering, Applied Physics, or related fields. * Proven experience in embedded systems design, automation, or controlled agriculture. * Knowledge of CAD/CAE design, preparation of electrical/mechanical drawings, and safety regulations. * Analytical ability to integrate hardware and software technological solutions. * Skills to lead technical teams, manage product versions, and provide strategic advisory. **We Offer:** * Participation in an innovative smart agriculture project. * Technical freedom to design high-impact solutions. * Collaboration with an interdisciplinary team committed to sustainability and innovation. Job type: Part-time

Cra. 5 #3-7, Mosquera, Cundinamarca, Colombia

Negotiable Salary